The future has landed in small pixelcontroller for RGB LEDs
ESPArtStick line are a small pixel controller designed to control a single addressable LED pixels/neopixels using a special shield and for the Wemos D1 mini. Works with FPP and xLights.
In the last few years, individually addressable RGB lights have been getting cheaper and cheaper. These lights contain a small controller chip alongside the RGB LED which makes it show a certain color. The controller chips have a serial data input and output, and can be daisy-chained together. In this way you can control many different lights using just a few control wires (rather than needing wires going to each individual light).If you’ve played around with controlling LED pixels, you know that getting the infrastructure set up to control your pixels can be quite time-consuming.
This 8 way Power Distribution is a 8 port fused output board that makes it easier to wire for your power needs such as when doing power injection. Power input screw down input terminal rated for 12-22awg and 8 easy connect Phoenix style terminal plugs rated for 16-28awg. Each port is fused with each 5A fuse and has a power indicating light which lights when the port is receiving power.
Incorporating LEDs into an electronic project used to be a veritable rat’s nest of wires and custom code. The arrival of dedicated LED driver chips brought welcome relief, offloading grunt work from the micro controller and allowing one to focus on the application. Much simpler, but still not “Christmas light” simple.The ESP Art StickIntegrates Lights in the latest advance in the quest for a simple and affordable full-color LED that is easy to use.
Microcyb
ESP Art Stick
Dedicated to the creation of new and innovative ways to power devices at home at a affordable cost.